Posted in

He Told John Wayne ‘That Rusty Gun Is Worth $15’ — Then Wayne Showed Him What Was Actually There

Harlan’s first read, passing through. Ranch hand, maybe a foreman. Looking for something functional, not collectible. $200 budget at most. The type who handles everything and buys nothing. He went back to  the grip panel. The stranger didn’t announce himself. Didn’t ask for help.

"
"

Didn’t drift toward the glass display cases where Harlan kept the serious pieces. He moved slowly along the left wall, the mid-range inventory, $50 to $300. Hunters and hobbyists and decorators. The stranger looked at these without touching them. Just looked. His hands stayed in his jacket pockets. Then he moved to the back wall.

The back wall was where Harlan kept what he privately called the remainder shelf. Three unpainted wooden shelves, floor to ceiling, estate lots, bulk purchases, pieces that had never earned their way to the better display. Price tags in pencil on masking tape, $8 to $45. This was not the part of the shop Harlan showed to anybody, because nothing there had ever warranted showing.

The stranger crouched down at the bottom shelf. Harlan watched from the workbench. He felt the specific irritation of a man whose time is about to be wasted. The bottom shelf was the worst of it. Pieces taken in trade just to close other deals. Weapons with missing parts or finishes so far gone they’d crossed from antique to ruin.

He’d been planning to sort it in the spring. He’d been planning that for four springs now. The stranger reached past a Bowie knife with a cracked handle and a box of corroded cartridges, and he picked up the revolver. It was, by every visible measure, worthless. A single action revolver, small frame, five-shot cylinder.

The finish was gone almost entirely, replaced by a uniform reddish-brown oxidation that covered the barrel, the frame, and most of the cylinder. The grips were cracked walnut, the right panel missing a chip the size of a thumbnail at the bottom. One of the ejector rod screws was missing. The barrel had a ring of pitting just forward of the forcing cone that looked, from a distance, like it had been dragged through gravel.

The masking tape price tag read, in Harlan’s own pencil, $15. The stranger held it in both hands the way you hold something when you’re not yet sure what it is. He turned it over. He looked at the backstrap. He looked at the cylinder. He held it up toward the small window above the shelf where the afternoon light came in flat and gray, and he tilted the frame at an angle and looked at something on the left side of the receiver, below the cylinder, that from where Harlan was sitting was invisible.

Then he stood up. He walked to the counter and set the revolver on the glass top. His expression was entirely neutral, not challenging, not excited, not anything in particular. “What can you tell me about this one?” he said. Harlan put down his work, walked over, and looked at the revolver on the counter. He picked it up.

He turned it once in his hands. He looked at the revolver the way a doctor looks at an x-ray he’s already read. “It’s a trade-in. Came in with a lot purchase, maybe 3 years back. Small frame five-shot. Probably made sometime in the 1870s or 1880s. Manufacturer unclear. Nothing exceptional. Surface rust throughout.

Grip damage, missing hardware.” He set it back on the counter. “$15 as marked. I can do 12 if you want it today.” The stranger looked at the revolver. “What manufacturer?” he said.  Harlan spread his hand slightly, a gesture that meant the question wasn’t worth more than the gesture. “Unclear. No visible markings.

Could be any number of small run shops from that period. Without markings, it’s categorically unidentifiable and value drops accordingly. Like I said, $12.” The stranger reached out and picked the revolver back up. He turned it in his hands for a moment. Then he did something Harlan hadn’t done in 3 years of owning this piece.

He tilted the frame downward and looked at the underside of the barrel, close to the frame, in the deep shadow where the barrel met the ejector housing. He held it toward the window light. He was very still for a long moment. Listen to what happened next, because this is the part most people get wrong when they tell this story.

They assume the stranger said something dramatic, something that announced itself. He didn’t. He ran his thumb once along the barrel shank, slow and deliberate, the way a blind man reads a page. The gun oil smell that had lived in this shop for 40 years seemed to sharpen in that moment. Then he set the revolver back on the counter with the same unhurried hands that had lifted it, and the small clip of metal on glass was the only sound in the room.

Then he said, “There’s a stamp on the underside of the barrel shank. You need a magnifying glass and good light, but it’s there.” Harlan said nothing. “It’s a small cartouche.” The stranger continued, his voice carrying the same flat,  conversational quality it had from the start. “Oval frame, two letters inside, E over H.

That’s the inspection stamp of Eli Hartman, who was a government arms inspector contracted by the U.S. Army Ordnance Department between 1873 and 1879. Hartman only inspected  weapons purchased under specific contracts. This frame size and cylinder configuration match the Merwin Hulbert Field Model, which was one of three revolvers in the 1876 Ordnance purchase.

” Harlan was quiet for a moment. “That’s a very specific claim,” he said. “It is. You’re saying this is a government contract Merwin Hulbert.” “I’m saying the inspection stamp is consistent with that. Whether it actually is one depends on what’s under 30 years of oxidation on the frame, but the stamp doesn’t lie. Hartman used a specific die.

The oval has a particular elongation in the lower half, and the E is Roman cut, not italic. You can verify it.” Harlan looked at the revolver on the counter. He looked at it differently than he had 30 seconds ago. Here is what Harlan knew about Merwin Hulbert revolvers, knowledge that 20 years on his feet had never once required him to use.

Merwin Hulbert & Company had made some of the finest handguns of the 1870s. Technically sophisticated, exceptionally built, government contract examples were rare. The Army had standardized on the Colt, meaning the 1876 Merwin Hulbert purchase had been limited, and the weapons had scattered. Most were gone. The ones that survived sold for prices that bore no relationship to $12.

Harlan picked up the revolver. He walked to his workbench. He got the magnifying glass from the second drawer, the good one, the 10-power loupe with the ring light. And he tilted the barrel toward the lamp and found the underside of the barrel shank, and he looked. Remember that box lot he’d mentioned? >>  >> The spring cleanout? The pawn shop in Elko? $40 for the whole shelf.

That deadline was 3 months away. He was looking at the gun he’d been about to include in it. It took him a while to find it. The oxidation had softened the edges, but it was there. Notice what the loupe showed him, because this detail matters. Oval frame, two letters, E over H. The E was Roman cut, not italic.

Read More